bimmer-tool Lite 3.7.20-L

bimmer-tool offers a comprehensive suite of features for BMW cars, including the ability to read and clear fault codes, request DPF regeneration, and access live engine data.

For vehicles manufactured before 2008, the application's functionality is constrained, and it is recommended to use a K+DCan USB cable connection for optimal performance. Wireless ELM adapter connections on pre-2008 cars may face limitations in functionality or may not be feasible.

It is important to note that a reliable OBD adapter is necessary for the proper functioning of this application. Recommended adapters include K+DCan cables, ENET adapters (for F/G series), Bluetooth adapters like Vgate vLinker MC/FS/BM/FD, UniCarScan UCSI-2000/USCI-2100, Carista, and Veepeak OBDCheck BLE.

The bimmer-tool application enables users to perform a range of functions:

• Read DPF regeneration status and detailed information
• Request DPF regeneration
• Reset DPF adaptation values (essential after filter replacement)
• Access exhaust fumes pressure and injector adjustments
• View actual and expected values for air mass, intake manifold pressure, and fuel pressure
• Log data to CSV files for further analysis
• Register battery replacements without changing battery properties
• Reset lamps circuits blocked due to short-circuit errors
• Reset oil/brake service and change intervals

The application is compatible with various OBD adapters such as K+D-Can USB, ENET cables/Wifi Adapters, ELM327 Bluetooth, and ELM327 WiFi, each offering distinct advantages based on the BMW series and model year.

Users requiring assistance or having queries can reach out via email using the contact details provided at the bottom of the page.

To get started with bimmer-tool:

1. Connect the adapter to the OBD II socket
2. Turn on the ignition
3. Select the appropriate connection method:
   • If using USB, connect the adapter to the phone using a USB-OTG cable and launch the bimmer-tool app
   • If using Bluetooth, pair the adapter with the phone via Bluetooth settings after enabling Bluetooth on your device
   • If using WiFi, disable mobile data transmission, enable WiFi, find the adapter's WiFi network, and connect
4. Launch the app, select 'Car,' choose your model and year
5. In 'Connection,' specify the connection type, adapter type, and communication protocol
6. Click on 'Connect' to establish a connection

However, there are limitations for some models. For vehicles predating 2008 and specific models like e46/e39/e83/e53, a K+DCan cable connection is mandatory with support limited to only the engine ECU. Wireless ELM adapters may not be compatible in these cases.

The application addresses common issues like 'No response' errors in cars up to 2007 with BT/Wifi adapters by suggesting selecting the ATWM option under advanced connection settings. In case of 'No connection' problems despite correct adapter & protocol settings, users are advised to force stop all diagnostic applications or restart their phone before attempting another connection.

The permissions requested by this app serve specific functions:

• Storage: necessary for USB adapters support
• Photos/Media/Files: enables CSV file creation
• Pair with Bluetooth devices/access Bluetooth settings: required for Bluetooth adapters support
• Full network access: essential for WiFi adapters support
• Approximate location: although possible through Bluetooth, this app does not utilize or read location information